CABLES TO GO 29842-500ft RG6 Quad Shield Coaxial Cable Installation Kit with Tester

CABLES TO GO 29842-500ft RG6 Quad Shield Coaxial Cable Installation Kit with Tester



Salient features:

Everything you need for simple and precise coax cable installation, including testing

Features:

The RG6 Quad Shield Coax Installation Kit with Tester from WorldofCables includes everything you need to assemble and evaluate a basic cable run in one convenient package. Wire your den, bedroom or living room for CATV/DSS quickly and easily. The kit includes 500 feet of quad-shielded, 2.2GHz-rated, RG6/U cable, a cable tester, a coax cutter, a coax stripper, a crimping tool and 20 crimp-style, F-type connectors. Having the right tools at hand will simplify the task and give you professional results.

The Coax RF Tester is the easy and effective way to test your coax cable runs. It identifies wiring faults of both RG59 and RG6 while enabling you to test four different runs* from a single point of entry with its four included terminators.

* Please note - The Coax RF Cable Tester cannot test through splitters, as it is unable to determine which terminator is receiving the signal

Kit Contents:

* 500 feet 18 AWG, 75 Ohm, RG6/U coaxial cable, 2x 100% foil and 1x 60% plus 1x 40% braid shielding, rated to 2.2GHz (part# 27300)
* 1 4-position coaxial tester (part# 27554)
* 1 coax cable cutter (part# 04612)
* 1 F-type connector install tool (part# 04619)
* 1 coax cable stripper (part# 04592)
* 1 coax crimping tool (part# 04625)
* 20 crimp-style F-type (quad shield) coax connectors (part# 27332)

Package Contents:

* 500 feet 18 AWG, 75 Ohm, RG6/U coaxial cable, 2x 100% foil and 1x 60% plus 1x 40% braid shielding, rated to 2.2GHz
* One 4-position coaxial tester
* One coax cable cutter
* One F-type connector install tool
* One coax cable stripper
* One coax crimping tool
* Twenty crimp-style F-type (quad shield) coax connectors

Specifications:

* Warranty: 90 Days
* Size: 500ft
* Mfr: Impact Acoustics
* Weight: 21.7lbs

CABLES TO GO 41033-Bi-Directional Amplifier (10 dB reverse gain)

CABLES TO GO 41033-Bi-Directional Amplifier (10 dB reverse gain) Salient features:

For use with digital cable and cable modem.

Features:

Digital cable and cable modem requires the ability to “talk back” to the cable company’s system, standard cable TV amplifiers lack this ability. This amplifier is housed in a robust, tin plated zinc housing providing 130dB shielding against RF leakage. Low internal noise and built-in magnetism resistant ferrites ensure a clean and clear picture. The forward gain (54~1000MHz) is 15dB and the reverse gain (5~42MHz) is 10dB.


Specifications:
* Warranty: 90 Days
* Mfr: Impact Acoustics
* Weight: 1.58lbs

CABLES TO GO 43077-250ft Composite In Wall Cable - (1) RG6QS + (2) Cat5E

CABLES TO GO 43077-250ft Composite In Wall Cable - (1) RG6QS + (2) Cat5E


Salient features:

Get television, telephone and network in one cable! Perfect for wiring bedrooms and the home office!


Features:

More homeowners are demanding homes built with connectivity in mind. Personal computers, smart appliances, satellite, digital cable and HDTV are finding their way into many homes. Composite cable by Impact Acoustics satisfies the homeowner’s demands for connectivity by combining the most commonly used cable types into one easy-to-install cable.

One RG-6/U Quad Shield is ideal for antenna, cable television and satellite installations. This is 18AWG copper clad steel center conductor surrounded by a foam polyethylene dielectric. A bonded aluminum foil and 60% aluminum braid over another foil and 40% aluminum braid provide 100% shield coverage. Swept tested to 3GHz to ensure performance at applicable frequencies.

Two CAT5e UTP cables for home networks and low voltage applications consist of four twisted pairs of 24AWG, 350MHz cable. All cables are color coded for easy identification. This UL listed cable meets UL and CUL specifications for CL1, CL2, CM, CMX and CMG installations. To help you keep track of cable used, the cable jacket is sequentially marked every two feet.

* Pull three cables at one time!
* One RG-6/U plus two CAT5e
* 18AWG copper clad steel center conductor
* Bonded foil covered by 60% aluminum braid over foil and 40% aluminum braid provide 100% shield coverage
* Foam polyethylene dielectric
* Four twisted pairs of 24AWG, 350MHz
* Swept tested to 3GHz
* Sequential foot marking
* CM/CL2 rated PVC jacket
* UL listed

Specifications:

* Warranty: Lifetime
* Color: Black
* Size: 250ft
* Mfr: Impact Acoustics
* Weight: 35.5lbs